a) 90° for RH doors with counter-clockwise opening.
b) 90° for LH doors with clockwise opening.
c) 180° opening.
The rotation stop prevents a damaging over-rotation of cam / 3-point cam.
IP65 according to DIN EN 60529 will be achieved by cap and o-ring.
Material
Swinghandle, dish, cover and cap: PA6, black
O-rings: NBR Perbunan
Hexagon nut and washer: steel, zinc plated
Shaft: brass, untreated
Snap wedges: sintered steel
Stop: zinc die, untreated
Remarks
1. guide swinghandle with pre-assembled cam through upper cutout. 2. hook-in the lower part of the swinghandle and clip it in at the top. 3. press cap on.
Drawings for rod calculation (see accessories): 1. stroke 18mm 2. clearance
Profile half cylinders and their assembly must be ordered separately.
