[2-102]

Swinghandle RS 105 for PHZ, RC2

Advantages

Swinghandle with liftable operating lever.
90° Closing operation.
For profile-cylinders 40 and 45mm.
(1.) If a profile-cylinder 40mm is used, the cylinder is located 5mm lower in the operating lever.
Lockable with profile-cylinder 45° or 90° cam position.
Complies with security test DIN EN 1630 RC2.
Only in combination with profile cylinders according to DIN 18252.
Secured with a bolt against vandalism.
Saw up difficult because of steel insert (HRC 45).
Seismic-proof according to GR-63-CORE, Issue 4.
IP65 according to DIN EN 60529.
RH / LH application.

Material

Swinghandle, fastener, dish, dust cover and cap: zinc die, black
Bolt: AISI 316
Shaft: brass
Washer, nut and screw: steel, zinc plated
Flat external seal: NBR/ Fiber

Remarks

(S) Door-thickness max. 3mm

Drawings for rod calculation (see accessories):
1. stroke 18mm
2. clearance

To get the same design for RH and LH doors it is possible to make two cutouts with □46 symmetrically to the middle of the door.

Profile half cylinders and their assembly must be ordered separately.

For swinghandles with mechatronic locking control see www.elinebydirak.de.