[7-087.01]

Flush-mounted Compression Latch L28/L37 with Threaded Square Rod Stainless Steel

Advantages

Flush-mounted version.
Indication of opened/closed position on the housing edge and the insert.
Vibration-proof.
IP65 to DIN EN 60529.
RH and LH version.
The H-dimension can be varied via the cranking of the cam.
The cam can be varied on the threaded square rod to ±11mm (GL 28) and ±6mm (GL 37) via nuts (included).

Material

Housing, insert, threaded square rod, nut and anti-rotation device: AISI 316
Serrated screw, serrated lock washers and nuts: stainless steel
O-ring: NBR

Remarks

(S) Door-thickness max. 13mm at GL 28mm
(S) Door-thickness max. 22mm at GL 37mm
(S) Door-thickness min. 1.8mm
Negatively bent cams can not be installed pre-assembled.

1. compression 6mm
2. o-ring
3. nut
4. anti-rotation device (included in scope of delivery)
5. washer when using cylinder head screws or weld studs/nuts
6. optionally also available with H-dimension adjustment

Available versions

Flush-mounted Compression Latch with insert, RH version, closing left

Product number

Insert

Housing length

Door-thickness (S)

Installation type

Delivery Unit