[7-061]

NT Swinghandle FS PrC Stainless Steel for PHZ

Advantages

Low profile swinghandle for profile-cylinder application with rod latch see product system 7-040.
Protected against vandalism by extremly tight tolerances.
The flush design prevents this swinghandle being used as climbing support.
Locking cylinder fitted in the dish and protected against being forced through.
Bolted internal cap is made of stainless steel.
Fire protection tested with E60 classification according to DIN EN 45545-3.
IP65 according to DIN EN 60529.
RH / LH application.

Material

Dish, handle, cover, cap, rotating disk and locking bolt : AISI 316
Spring, pins and screws: stainless steel
Cap sealing: NBR
O-ring: NBR
Washer: PTFE- Teflon

Remarks

Door-thickness 1.5 - 2.5mm

1. open cover
2. turn key
3. the swinghandle springs open
4. turn handle

Optional cylinder cover screwable by M3x6, drive TX10.

Profile half cylinders and their assembly must be ordered separately.