Installation with internal caps and o-ring for IP65 EN 60529 (seals are included).
The swinghandle is symmetric and can be applied both for RH and LH doors.
The swinghandle pre-assembled by DIRAK is hooked into the cutout provided and then clipped into place in the upper area.
The flat rods are placed into shown position and secured by the clip-on PA cover.
Material
Swinghandle and dish: PA, black
Snap wedges and pinion: sintered steel
Remarks
Suitable flat rods see product system 3-171DST.
1. stroke 24mm 2. clearance height 3. hook-in the lower part and snap-in the swinghandle 4. LH, clockwise opening door 5. RH, counterclockwise opening door 6. clip cover
Profile half cylinders and their assembly must be ordered separately.
