T-handle with 90° swing-out and 135° rotatable T-handle element.
For flat or round rods.
Safety tested according to RC2 DIN 1630. Only in combination with profile half cylinders according to DIN 18252.
Very tight tolerances.
The flat design prevents the handle from being used as a climbing aid.
The locking cylinder can not be forced inwards by axial forces.
The T-handle can not be folded down if not in line with the housing.
Separate locking device sub-unit. Suitable for: Euro cylinder, KABA cylinder and padlock.
Application inside or outside the sealed area.
IP65 according to DIN EN 60529.
RH / LH application.
Condensation water drain.
Material
Dish, T-handle: zinc die, black
Flat rod and rod stub: steel, zinc plated
Padlock bolt: AISI 303
O-ring: NBR, black
Remarks
(S) Door-thickness 1.5 - 2.5mm
1. stroke 24mm [0.945] 2. position of the spacer if used outside the sealed area 3. position of the spacer if used inside the sealed area 4. closed and locked 5. open cover 6. turn key: T-handle ejects 7. T-handle can be operated
Profile half cylinders and their assembly must be ordered separately.
