Due to an enlarged oblong hole, the doors are easy to lift-off.
IP65 according to DIN EN 60529 (optional).
180° opening angle if hinges are installed on the right or on the left. 140° opening angle if hinges are installed on the right and on the left.
Material
Frame- and door-part: zinc die, black
Snap wedges: sintered metal, coated
Pin ø6x15: stainless steel
Pin ø6x50: steel, zinc plated
Washers: brass, nickel plated
Spring washers and socket cylinder screws: steel, zinc plated
Remarks
1. at a gap dimension of 1mm the notch heigth is 7mm. Depending on the gap size the height of the notch differs. 2. two socket cylinder screws M6x10 DIN 7984 and 2 spring washers DIN 7980 are included.
By an identical hole pattern in the frame the hinges can be replaced by dual hooks of product system 3-910DST.
