For 8mm round rods for installation without tools on weld-stud M6x20mm.
The rod guide has to be placed over the weld stud and then pushed onto the thread until a "click" is audible. It is locked now in the final position.
Visual inspection possible from above through openings.
The rod guide can be removed from the threaded stud by inserting a flat head screwdriver, pushing the jaws apart and sliding the rod guide out.
Material
Rod guide: PA6, black
Remarks
Completely pre-assembled rod latches (including 3-point cam, round rod, rollers and rod guide) can also be mounted with this rod guide, as the rod guide is simply pushed over the weld stud.
The rod guide must be installed as shown in the figure.
